Two premium brands. One solution.
As Milk Bar pioneered group feeders and controlled feeding, Hiko, pioneered the iconic hutch bucket and 38mm teats.
Being market leaders in both systems, us at Milk Bar and the team at Hiko believe in innovation not imitation, so we partnered to bring the market a premium solution for farms using 38mm teats!
The front end of the teat features the controlled flow of the Milk Bar Teat to bring all the health benefits associated with a
regulated delivery of milk.
New Drip Proof Technology gives the teat supreme quality and functionality.
The back end of the teat features the ultra hygienic Hiko 1- Click connection to secure the teat into a 38mm hole. With no threads or screws this is without doubt the most hygienic connection system on the market.
Combined, these two technologies deliver the ultimate calf teat.
Milk Bar 1-Click Teats
Milk Bar 1-Click
Milk Bar Code: 0000000
Quantity: 10 Milk Bar Teats
10 1-Click Connectors
Milk Bar 1-Click Teats
Milk Bar Code: 0000000
Quantity: 10 Milk Bar Teat
Replacement teats.
1-Click Connectors
Milk Bar Code: 0000000
Quantity: 1 1-Click Connector
Replacement connector.
Made specifically to work with the Milk Bar Teat
Research proves that controlling the flow of milk with the Milk Bar Teat improves calf health and improves weight gains.
Now, with the Milk Bar Teat 1-Click Teat you can experience all the goodness that easily and hygienically fits into a euro standard 38mm hole.
How we got here,
For hygiene reasons didn't want to use a screw on connector.
We also don't like to use a ball valves as it disrupts and increases the milk flow.
We loved the Hiko 1-Click System and immediately saw it was the hygienic solution to fitting 38mm teats!
The teat remains a pull through to make it super easy to clean and change.
The connector has been adapted with no valve so the milk flow remains controlled.
Drip Proof Technology.
Controlled Milk Flow.
Super Hygienic.
Job done.


Calf Buddy Feeders for Milk Bar 1-Click Teats
Calf Buddy 1
Volume: 9L
Weight: 700gm
Length: 290mm
Height: 400mm
Width: 270mm
Hooks: Slots for brackets
Handle: Stainless steel
Optional extra lid
Available: Global
The world renowned Hiko Hutch Bucket and
1-Click Connector is combined with the
Milk Bar Teat to give you the new
Calf Buddy 1, for individual calves!
A 9L capacity and optional extra lid, the feeder is semi transparent so you can check the milk volume from afar.
Large volume gradients and a stainless carry handle make it a lovely feeder to use and handle.
Fitted with the unique Milk Bar 1-Click Teat for optimum calf health, Drip Proof Technology for durability and the ultra hygienic Hiko
1-Click Connector System.
It's a game changer for hutch buckets.

There is increasing work done on the benefits of pairing calves from birth, or as young as possible, in fact some countries are making it a legal requirement for calves to be raised in the Buddy System because of the improved animal welfare and calf happiness it brings.
Many farms are put off the Buddy System because of the cross suckling problems. The trick to preventing cross suckling is to control the flow of milk and slow down the drinking time. This addresses the cause issue and reduces or even stops cross suckling.
Prevention is better than cure, so slow the flow and stop the problem with the Milk Bar Teat.
A bit about the Buddy System
Calf Buddy 2 13L
Milk Bar Code: 000000
Volume: 13L
Weight: 0kg
Length: 0mm
Height: 0mm
Width: 0mm
Handle: Bracket slots
Optional extra lid
Available: Global
As the Buddy System becomes more popular, this brilliant little low cost option is ideal to test pairing calves.
Semi transparent and large gradient markers make it easy to fill and use.
Hutch bracket slots lets you retro fit the feeder to existing brackets.
Fitted with the Milk Bar 1-Click Teat to reduce cross suckling after feeding for a successful Buddy System experience.
Calf Buddy 2 20L
Milk Bar Code: 000000
Volume: 20L
Weight: 0kg
Length: 0mm
Height: 0mm
Width: 0mm
Hooks: Bracket slots
Available: Global
For those needing a higher volume, the Calf Buddy 2 20L is extremely durable and will last you many years.
Fits perfectly on existing hutch buckets so you can easily add this to a conventional set up.
Nicely rounded edges and no tight places make it super easy to clean.
Fitted with Milk Bar 1-Click Teats,
happy calves, happy you.
Calf Buddy 5
Milk Bar Code: 000000
Volume: 50L
Weight: 0kg
Length: 000mm
Height: 000mm
Width: 000mm
Hooks: Bracket Slots
Handle: Finger grips
Available: Global
The perfect size for a group hutch or a calf pen. Such a lovely light feeder to handle but has exceptional durability.
The feeders stack inside each other with teats fitted so you can carry four or five at a time.
Simple, easy clean bracket slots and locking system secure the feeder even with five ready to wean calves knocking it around!
Fitted with Milk Bar 1-Click Teats for exceptional calf health, durability and hygiene.
We rear calves, we know it's natural to use a teat for many months before changing it.
We get it, it's human nature!
But, when it comes to feeding milk to calves, controlled flow is the key so we deveolped the Follow the Teat System to take the guess work out of raising your calves.
Step 1:
New calf, new teat.
Fit a new Milk Bar 1-Click Teat to the feeder (Calf Buddy 1 or Calf Buddy 2)
This teat and feeder stay with this calk until weaning, OR, until you decide to merge calves into a larger group.
Step 2:
If you merge your calves into a larger group as they get older, simply remove the Milk Bar 1-Click Teat from the early stages feeder and insert them into the Calf Buddy 5.
After weaning, discard the worn Milk Bar 1-Click Teat and insert a new teat into the 1-Click Connector for the next new calf.
For the environment, we use no oil or synthetic based rubber so the teats will biodegrade in landfill.
Top Tip! Follow the Teat for easy calf management!

